Insect sticky traps, pheromone traps, yellow sticky traps and sticky fly tapes are adhesive-based products that require accurate coating and efficient converting to achieve consistent production. For manufacturers planning to enter or expand in this segment, selecting the right insect sticky trap making machine is an important decision.
Trasy Enterprises offers a range of Hot Melt Coating and converting machines designed for different production requirements, including machines for sticky insect rolls, traps and sticky fly tapes.
With configurations available for coating, printing, cutting and hole punching, manufacturers can select a machine according to their product design and required production capacity.
What Is an Insect Sticky Trap Making Machine?
An insect sticky trap making machine is a production system used to manufacture adhesive-based insect control products. Depending on the machine configuration, the production process can include hot melt adhesive coating, printing, cutting and hole punching.
Trasy Enterprises offers machines with a maximum web width of up to 300 mm, with production configurations ranging from approximately 3, 500 metres to 7, 000 metres per 8-hour shift, depending on the model.
The machines can be configured for products such as sticky insect traps, pheromone sticky traps, yellow insect traps and sticky fly tapes.
Why Hot Melt Coating Is Important
The coating stage is one of the most important operations in manufacturing an adhesive-based trap. A suitable hot melt coating system helps integrate the adhesive-coating operation into a continuous manufacturing process.
For manufacturers, the choice between a standard single-side coating machine and a higher-production both-side coating machine depends on the construction of the final product and the required output.
Trasy Enterprises provides different configurations so that the coating and converting equipment can be selected according to the intended application.
Range of Insect Sticky Trap Machines from Trasy Enterprises
1. HMC 12 + PC3 – Coating, Cutting & Hole Punching
The HMC 12 + PC3 is a hot melt coating machine with separate cutting and hole punching equipment.
It is designed for a maximum web width of 300 mm and has a stated production capacity of approximately 3, 500 metres per 8-hour shift.
This configuration can be considered for manufacturers requiring a straightforward coating and converting setup for insect sticky traps.
Listed price: ₹16.80 lakh
2. HMC 12P + PC3 – Coating with Inline Printing
The HMC 12P + PC3 adds inline printing to the hot melt coating process, with separate cutting and hole punching.
The machine supports a maximum width of 300 mm and a stated production capacity of approximately 3, 500 metres per 8-hour shift.
This configuration is suitable where printing is an integral part of the finished sticky trap product.
Listed price: ₹17.70 lakh
3. HMC 12² + PC3 – High-Production Both-Side Coating
For manufacturers requiring higher production, the HMC 12² + PC3 provides both-side hot melt coating with separate cutting and hole punching.
The maximum web width is 300 mm, while the stated production capacity is approximately 7, 000 metres per 8-hour shift.
Listed price: ₹20.40 lakh
4. HMC 12²P + PC3 – Both-Side Coating with Inline Printing
The HMC 12²P + PC3 combines high-production both-side hot melt coating with inline printing, followed by separate cutting and hole punching.
With a maximum width of 300 mm and stated production of approximately 7, 000 metres per 8-hour shift, this machine is intended for manufacturers looking for higher-output production with printing capability.
Listed price: ₹21.30 lakh
5. HMC 12²PC – Both-Side Coating with Inline Cutting & Hole Punching
The HMC 12²PC integrates both-side hot melt coating, inline cutting and hole punching.
This configuration has a maximum web width of 300 mm and a stated production capacity of approximately 7, 000 metres per 8-hour shift.
It is an option for manufacturers looking for greater integration of coating and converting operations.
Listed price: ₹24.00 lakh
Sticky Fly Tape Hot Melt Coating Machine
Trasy Enterprises also offers the RCI Sticky Fly Tape Hot Melt Coating Machine, specifically listed for sticky fly tape production.
The machine supports a maximum width of 300 mm and has a stated production capacity of approximately 7, 000 metres per 8-hour shift.
Listed price: ₹15.00 lakh
For businesses specifically focused on sticky fly tape manufacturing, a dedicated machine configuration can provide an alternative to a general-purpose insect trap production line.
Sticky Insect Rolls and Traps Making Machine
The HMC RCI 12 + PC3 is another configuration listed for manufacturing sticky insect rolls and traps.
It combines hot melt coating with separate cutting and hole punching equipment.
The machine has a maximum width of 300 mm and a stated production capacity of approximately 3, 500 metres per 8-hour shift.
Listed price: ₹19.50 lakh
How to Select the Right Sticky Trap Making Machine
The appropriate machine depends largely on the product and production requirements.
Before selecting an insect sticky trap making machine, manufacturers should consider:
• Required production capacity
• Maximum web width required
• Single-side or both-side hot melt coating
• Whether inline printing is required
• Whether cutting needs to be separate or inline
• Hole punching requirements
• Whether the primary product is a sticky trap, insect roll or sticky fly tape
A manufacturer producing a basic sticky trap may require a different configuration from a business looking for high-production, both-side coating with integrated printing and converting.
Choose the Right Hot Melt Coating Technology
The range of Trasy Enterprises machines allows manufacturers to select equipment according to their production requirements rather than using a single machine configuration for every application.
From the HMC 12 + PC3 for coating, cutting and punching to the higher-production HMC 12² series, and from dedicated sticky fly tape coating to sticky insect roll and trap production, Trasy Enterprises provides multiple equipment configurations.
If you are planning to manufacture insect sticky traps, pheromone traps, yellow sticky traps or sticky fly tapes, the first step is to define your product construction, web width, printing requirements and desired production output.
Talk to Trasy Enterprises
Looking for an insect sticky trap making machine, sticky trap machine, yellow sticky trap making machine, pheromone trap machine or sticky fly tape coating machine?
Contact Trasy Enterprises to discuss your product and production requirements.
Trasy Enterprises offers a range of Hot Melt Coating and converting machines designed for different production requirements, including machines for sticky insect rolls, traps and sticky fly tapes.
With configurations available for coating, printing, cutting and hole punching, manufacturers can select a machine according to their product design and required production capacity.
What Is an Insect Sticky Trap Making Machine?
An insect sticky trap making machine is a production system used to manufacture adhesive-based insect control products. Depending on the machine configuration, the production process can include hot melt adhesive coating, printing, cutting and hole punching.
Trasy Enterprises offers machines with a maximum web width of up to 300 mm, with production configurations ranging from approximately 3, 500 metres to 7, 000 metres per 8-hour shift, depending on the model.
The machines can be configured for products such as sticky insect traps, pheromone sticky traps, yellow insect traps and sticky fly tapes.
Why Hot Melt Coating Is Important
The coating stage is one of the most important operations in manufacturing an adhesive-based trap. A suitable hot melt coating system helps integrate the adhesive-coating operation into a continuous manufacturing process.
For manufacturers, the choice between a standard single-side coating machine and a higher-production both-side coating machine depends on the construction of the final product and the required output.
Trasy Enterprises provides different configurations so that the coating and converting equipment can be selected according to the intended application.
Range of Insect Sticky Trap Machines from Trasy Enterprises
1. HMC 12 + PC3 – Coating, Cutting & Hole Punching
The HMC 12 + PC3 is a hot melt coating machine with separate cutting and hole punching equipment.
It is designed for a maximum web width of 300 mm and has a stated production capacity of approximately 3, 500 metres per 8-hour shift.
This configuration can be considered for manufacturers requiring a straightforward coating and converting setup for insect sticky traps.
Listed price: ₹16.80 lakh
2. HMC 12P + PC3 – Coating with Inline Printing
The HMC 12P + PC3 adds inline printing to the hot melt coating process, with separate cutting and hole punching.
The machine supports a maximum width of 300 mm and a stated production capacity of approximately 3, 500 metres per 8-hour shift.
This configuration is suitable where printing is an integral part of the finished sticky trap product.
Listed price: ₹17.70 lakh
3. HMC 12² + PC3 – High-Production Both-Side Coating
For manufacturers requiring higher production, the HMC 12² + PC3 provides both-side hot melt coating with separate cutting and hole punching.
The maximum web width is 300 mm, while the stated production capacity is approximately 7, 000 metres per 8-hour shift.
Listed price: ₹20.40 lakh
4. HMC 12²P + PC3 – Both-Side Coating with Inline Printing
The HMC 12²P + PC3 combines high-production both-side hot melt coating with inline printing, followed by separate cutting and hole punching.
With a maximum width of 300 mm and stated production of approximately 7, 000 metres per 8-hour shift, this machine is intended for manufacturers looking for higher-output production with printing capability.
Listed price: ₹21.30 lakh
5. HMC 12²PC – Both-Side Coating with Inline Cutting & Hole Punching
The HMC 12²PC integrates both-side hot melt coating, inline cutting and hole punching.
This configuration has a maximum web width of 300 mm and a stated production capacity of approximately 7, 000 metres per 8-hour shift.
It is an option for manufacturers looking for greater integration of coating and converting operations.
Listed price: ₹24.00 lakh
Sticky Fly Tape Hot Melt Coating Machine
Trasy Enterprises also offers the RCI Sticky Fly Tape Hot Melt Coating Machine, specifically listed for sticky fly tape production.
The machine supports a maximum width of 300 mm and has a stated production capacity of approximately 7, 000 metres per 8-hour shift.
Listed price: ₹15.00 lakh
For businesses specifically focused on sticky fly tape manufacturing, a dedicated machine configuration can provide an alternative to a general-purpose insect trap production line.
Sticky Insect Rolls and Traps Making Machine
The HMC RCI 12 + PC3 is another configuration listed for manufacturing sticky insect rolls and traps.
It combines hot melt coating with separate cutting and hole punching equipment.
The machine has a maximum width of 300 mm and a stated production capacity of approximately 3, 500 metres per 8-hour shift.
Listed price: ₹19.50 lakh
How to Select the Right Sticky Trap Making Machine
The appropriate machine depends largely on the product and production requirements.
Before selecting an insect sticky trap making machine, manufacturers should consider:
• Required production capacity
• Maximum web width required
• Single-side or both-side hot melt coating
• Whether inline printing is required
• Whether cutting needs to be separate or inline
• Hole punching requirements
• Whether the primary product is a sticky trap, insect roll or sticky fly tape
A manufacturer producing a basic sticky trap may require a different configuration from a business looking for high-production, both-side coating with integrated printing and converting.
Choose the Right Hot Melt Coating Technology
The range of Trasy Enterprises machines allows manufacturers to select equipment according to their production requirements rather than using a single machine configuration for every application.
From the HMC 12 + PC3 for coating, cutting and punching to the higher-production HMC 12² series, and from dedicated sticky fly tape coating to sticky insect roll and trap production, Trasy Enterprises provides multiple equipment configurations.
If you are planning to manufacture insect sticky traps, pheromone traps, yellow sticky traps or sticky fly tapes, the first step is to define your product construction, web width, printing requirements and desired production output.
Talk to Trasy Enterprises
Looking for an insect sticky trap making machine, sticky trap machine, yellow sticky trap making machine, pheromone trap machine or sticky fly tape coating machine?
Contact Trasy Enterprises to discuss your product and production requirements.
Keywords
